ADVANTAGES
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
- Large 3 inchi screen LCD, showing all functions and parameters. With EL background light.
- Seven impact devices are available for special application. Automatically identify the type of impact devices, and with the user calibration function.
- Test at any angle, even upside down.
- Large memory could store 500 groups (Relative to average times 32 ～1 ) information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.
- Battery information showing the rest capacity of the battery and the charge status.
- Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
- NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
- Auto power off to save energy.
- Excellent after-sale service system for high quality products–two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other equipment
- Heavy work piece
- The installed machinery and permanently assembled parts
- Testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for large-scale work piece
Technical Specifications
- Error and repeatability of displayed value:
| No. | Type of impact | Hardness value of Leeb | Error of displayed | Repeatability | |
| device | standard hardness block | value | |||
| 1 | D | 760±30HLD | ±6 HLD | 6 HLD | |
| 530±40HLD | ±10 HLD | 10 HLD | |||
| 2 | DC | 760±30HLDC | ±6 HLDC | 6 HLD | |
| 530±40HLDC | ±10 HLDC | 10 HLD | |||
| 3 | DL | 878±30HLDL | ±12 HLDL | 12 HLDL | |
| 736±40HLDL | |||||
| 4 | D+15 | 766±30HLD+15 | ±12 HLD+15 | 12 HLD+15 | |
| 544±40HLD+15 | |||||
| 5 | G | 590±40HLG | ±12 HLG | 12 HLG | |
| 500±40HLG | |||||
| 6 | E | 725±30HLE | ±12 HLE | 12 HLE | |
| 508±40HLE | |||||
| 7 | C | 822±30HLC | ±12 HLC | 12 HLC | |
| 590±40HLC |
- Measuring range：HLD（170～960）HLD
- Measuring direction：0°~360°
- Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS
- Display：segment LCD
- Data memory：500 groups max.（relative to impact times 32～1）
- Printing paper: width is （5±0.5）mm, diameter is 30mm.
- Battery pack: 6V NI-MH
- Battery charger: 9V/500mA
- Continuous working period：about 150 hours（With backlight off, no printing）
- Communication interface：0
- Outline dimensions：
Configuration
| No. | Item | Quantity | Remarks | |
| Standard | 1 | Main unit | 1 | |
| Configuration | ||||
| 2 | D type impact device | 1 | With cable | |
| 3 | Standard test block | 1 | ||
| 4 | Cleaning brush (I) | 1 | ||
| 5 | Small support ring | 1 | ||
| 6 | Battery Charger | 1 | 9V 500mA | |
| 7 | Paper for printing | 1 | ||
| 8 | Manual | 1 | ||
| 9 | Instrument package case | 1 | ||
| 10 | DataPro software | 1 | ||
| 11 | Communication cable | 1 | ||
| Optional | 12 | Cleaning brush (II) | 1 | For use with G type |
| Configuration | impact device | |||
| 13 | Other type of impact | Refer to Table 3 and | ||
| devices and support rings | Table 4 in the | |||
| appendix. |
Henüz görüntüleme yok.